Preview site. Prices are estimates from a draft pricebook, and orders aren't open yet.
Build your sink
InchesMillimetres
Edit in builder

No design in this link, so the default configuration is shown. Build your own in the builder.

Specification sheet · for discussion

838.2 mm × 558.8 mm × 254 mm single-bowl undermount sink

Not fabrication-ready CAD Nominal preview geometry. Not an approved fit or a factory-approved specification.

Ref
PF-33-22-10
Date
2026-10-31
Units
millimetres
Scale
not to scale on print
Plan view: 33″ wide by 22″ front to back LEDGE838.2 mm558.8 mmFRONTCabinet ≥ 914.4 mm · guidance, not an approved fit
A Plan from above
Section across the width: 33″ wide, 10″ deep COUNTER (CONTEXT)BACK LEDGE (BEYOND)838.2 mm254 mm deepCabinet ≥ 914.4 mm (guidance)
B Section across width
Section front to back: 22″, 10″ deep, with workstation ledge 558.8 mm254 mm deepLEDGE ¾″ STEPFRONT →← BACK
C Section front to back
Wall thickness detail: 16 gauge, 0.0625 inch nominal 16 ga · 0.0625″ · 1.6 mm14 ga · 0.0781″ (outline)WALL DETAIL ×16 · NOMINAL
D Wall detail, magnified

Specification

Overall width838.2 mm33″
Front to back558.8 mm22″
Bowl depth (inside)254 mm10″
BowlsSingle
MountUndermount
DrainRear; 3½″ strainer opening (nominal)
Gauge16 ga · 0.0625″ (1.6 mm) nominal
Steel304 stainless
Finishbrushed
Workstation¾″ ledge, ¾″ below rim
Cabinet≥ 914.4 mm — guidance only

Preview estimate

Base custom sink$1,450.00
Additional surface area$426.30
Additional bowl depth$195.00
Workstation ledge$140.00
Preview total (USD)$2,211.30

Pricebook preview-2026-10-31. Excludes freight, duty, tax, installation.

Notes

  1. Preview estimate from a demonstration pricebook. Not an offer and not a factory-approved price.
  2. Excludes freight, duty, tax and installation. Delivery times and rates are not yet published.
  3. Cabinet width is guidance (sink width + 3 in), not an approved fit. Confirm with your installer and countertop fabricator.
  4. This specification is for discussion. It is not fabrication-ready CAD.
  5. Counter, cabinet and reveal shown for context only; your fabricator sets the reveal.